INSTALLATION INSTRUCTIONS
1. The refrigerator should be located in a completely flat surface , Leave 5~10 cm between each side
of the appliance and the wall, and leave 30 cm between the top of the appliance and the ceiling.
2. Choose a location which is not exposed to sunlight, high
temperature or humidity , as humidity may cause stain.
3. Pulled out the bottom panel before installation.
4. The appliance can be adjusted by rolling its two legs in front when it
is unstable. Rolling in clockwise can rise up the machine.
5. The location should be firm and flat. An un-secure position may
cause noise and libration:
(a)The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat emission if
you need to locate it onto a carpet.
6. Make sure the adjustable legs are clung to the floor, and set the
appliance slope backward slightly for keeping the doors closed
tightly.
OPERATION INSTRUCTIONS
PLACEMENT OF FOOD
1. There should always be some space between items inside for air circulation.
2. Food should be to avoid becoming dry or with odour. kept in sealed package
3. Hot food should be cooled down before placing into the appliance. Otherwise,
interior temperature and electronic consumption will increase.
4. Reducing the frequency of door opening can efficiently lower down the
electronic consumption.
Warning
Do not use any electronic equipment inside the appliance.
The temperature of refrigerator can be controlled manually by the knob. However, the number shown
on the knob does not directly represent the temperature. Instead, the larger the number is, the lower
the interior temperature will be. 0 stands for off. Turn the knob to level 4 when it is normal, turn it to
the level 4-7 if a lower interior temperature is required; contrarily, lower to 4-1, when a higher one is
needed.
