6
OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER
1. Remove all exterior and interior packaging. Check that ice basket and ice scoop is
included. If any part or accessory is missing, please contact our customer service.
2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and
wash it in warm water.
3. Find a location for your ice maker that is protected from direct sunlight and other
sources of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface.
Make sure that there is at least 5 inches of space between the back and slides of
your ice maker and the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging in the unit.
5. The appliance must be positioned so that the plug is accessible.
CONNECTING YOUR ICE MAKER
DANGER
Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged please call our customer service at 800-562-0738.
1. This unit should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug which connects with standard three
prong wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do
not under any circumstances, cut or remove the third (ground) prong from the
power cord. Any questions concerning power and/or grounding should be directed
toward a certified electrician.
3. This appliance requires a standard 220-240 volt, 50Hz electrical outlet with three-
prong ground.
Before using your ice maker, it is strongly recommended to clean it thoroughly.
The ice maker is not designed to be installed in an outside area such as a garage
or a porch. Ambient temperatures of below 50OF or above 100OF will hinder the
performance of the appliance.
