8
VII. SELF-CLEANING MODE
The self-cleaning mode should be put into operation before you use your ice maker for
the first time and/or if there has been a long period without use.
WORK, ICE FULL, ADD WATER
indicators will be on at the same time when the ice
maker is in self-cleaning mode.
Stage 1:
1) Add equal amount of water and vinegar (1:1) into water reservoir.
2) In the state of stand-by mode, keep pressing
ON/OFF
button
at least 5 seconds
to activate self-cleaning mode. Please note self-clean mode will automatically start
after “Beep” sound.
3) During the self-cleaning mode, pump will draw water to the ice making box and
evaporator coils, then ice making box rotates and pours the water into water
reservoir. This cycle will repeat for 5 times.
4) Upon completion, the unit automatically changes to stand-by mode.
Stage 2:
1) Remove the drain cap and plug, then drain off the water, insert the plug and screw
drain cap.
2) Add fresh water to the maximum permit water volume line.
3) In the state of stand-by mode, keep pressing
ON/OFF
button
at least 5 seconds
to activate self-cleaning mode again with the purpose of clean-out.
4) Upon completion of this final stage of the self-cleaning process, the unit
automatically changes to stand-by mode. Proceed to drain the water from the
internal reservoir by removing the drain cap and plug. Leave the upper lid open to
allow it to air dry.
Please note that if there is a water shortage during self-cleaning mode, the until will
automatically go into stand-by mode; if ice making box fail to turn over,
ICE FULL
and
ADD WATER
indicators will be on at the same time, you need to keep pressing
ON/
OFF
button for more than 5 seconds to release self-clean mode to change for other
operations.
VIII. CLEANING AND MAINTENANCE
Warning:
Before cleaning or maintenance, switch off the appliance, remove the mains plug from
the wall socket and wait until the appliance has cooled down.
Do not leave water in the appliance for a long period to prevent the water from being
contaminated. Use the valve on the water outlet to remove the excess water.
