7
VI. OPERATION PANEL
Introduction of buttons and functions:
(1)
ON/OFF/Stand-by
button
(2)
ICE FULL
indicator light
(3)
ADD WATER
indicator light
(4)
WORK
indicator light
OPERATION:
Fit the plug into the wall socket, the
WORK
indicator light will flash and emit a short
beeping sound, and now the appliance is ready for use.
- To switch on the appliance, press the
ON/OFF/Stand-by
button
. The
WORK
indicator light will keep display not flash. The appliance starts making ice cubes.
- Within 15 minutes, the appliance is at the correct temperature and the first ice
cubes are ready. As long as the appliance is switched on, it will continue to produce
6 ice cubes every 9-13 minutes.
- Regarding look through the transparent window (1) to check whether the ice-cube
making process is running smoothly.
- If the ice cube bucket is completely full with ice cubes the
ICE FULL
indicator light
will be on and emits a short beeping sound.
Take the ice cube bucket out of the appliance, store the ice cubes in a cool place
and put the bucket back into the appliance. The ice cubes makers can be switched
on again straight away to prepare a new batch of ice cubes.
- In the absence of water, the
ADD WATER
indicator light will be on and emit a short
beeping sound. Fill the reservoir with water and press the button
to continue
the process.
- If the ice cubes are left in the appliance they will gradually melt, the melted water
will collect in the water reservoir and then the ice cubes maker will start to produce
a new batch of ice cubes. The machine can be stopped at any time by pushing the
button
. When the ice cube maker is not being used for an extended period
of time, empty the water out of the reservoir and unplug the appliance from the
electric wall socket.
- To interrupt the process, press the
ON/OFF/Stand-by
button
.
- Remove the mains plug from the wall socket. The display goes off.
- Allow the appliance to cool down completely.
