Guzzanti 8594186721771, Инструкция по эксплуатации

Страница: 73 / 82

3
TRANSPORTATION AND PLACEMENT
When getting the Wine Cooler, you should ensure that before you unfold the package, there is no
fault on the exterior of the Wine Cooler (in the aspects of strike, transformation and so on).
Open the door and check whether the interior is complete (wall, stand, control panel and so on).
When transporting and installing the Wine Cooler, attentions should be paid to:
1. Do not place the Wine Cooler in a too moist place (laundry, hovel, bathroom and so on), and
keep it away from heat;
2. Ensure the Wine Cooler is located on a solid and flat ground;
3. Ensure the Wine Cooler is paced on a stable level surface;
4. Ensure the ventilation conditions around the Wine Cooler;
5. Never pad the foam package of the Wine Cooler at the base of it;
6. Ensure the stability of the Wine Cooler by adjusting the adjusting feet if it is a little unstable.
Before the Wine Cooler is switched on at first time, you should waitfor 48 hours to allow the
refrigeration agent in the Cooler become stable.
Note:
if you have to move the Wine Cooler, the tilt angle should not be more than 45°, and the
tilt angle toward back direction should not be more than 20°, as shown in the figure: