Guy Laroche sl5101, Инструкция по эксплуатации

Страница: 8 / 43

13 12
Push-button B. Lower: return-to-zero push-button
1. After stopping the chronograph by pressing the upper control push-button
A.
2. Press the push-button B to reset the counters to zero.
This push-button only functions when the counters are stopped.
Interval Time Display:
1 Press push-button A to start timing.
2. Press push-button B to display time elapsed without stopping the
chronograph.
3. Press push-button B again to update the time elapsed.
4. Press push-button A to stop the chronograph.
5. Press push-button B to the chronograph.
Remark: The interval time can be displayed as many times as desired.
Chronograph seconds-hand:
1. Press the upper push-button A to start and stop.
2. Reset to zero by pressing lower push-button B.
Minute counter
1. The Minute counter Indicates the minutes elapsed from the start time by
moving forward one unit for each complete cycle of the seconds-hand.
2. Reset to zero by pressing push-button B.
Adjust hands to their zero position:
1. If one or more chronograph hands are at their proper zero position, a
battery change may be necessary.
2. Pull the crown to position 3 and press the push-buttons A and B
simultaneously and hold for 2 seconds. 3. Step 2 activates the
corrective mode, which is indicated by the centre seconds hand
rotating 360 degrees.
4. When the corrective mode is activated, the seconds hand can be adjusted.
5. Press push-button A once to advance by one second.
6. Hold push-button A down to advance continuously.
7. Press push-button B to adjust the minute and hour counter.
8. Press push-button A once to advance by one step.
9. Hold push-button A down to advance continuously.
10. Push the crown back to position 1 after all changes are made.