Guy Laroche sl5101, Инструкция по эксплуатации

Страница: 14 / 43

Setting the time
1. * Pull out the crown to position III (the watch stops).
2. Turn the crown until you reach the correct Time 8:45 .
3. * Push the crown back into position I.
Please note:
* In order to set the time to the exact second,
must be pulled out when the second hand is in position «60».
Once the hour and minute hands have been set,
must be pushed back into position I at the exact second.
24 25
Setting the date (quick mode)
1. Pull out the crown to position II ( the watch continues to run ).
2. Turn the crown anticlockwise until the correct date appears.
3. Push the crown back into position I.
1
Please note:
During the date changing phase between approx. 09:45 PM and
12 PM; the date must be set to the date of the following day.
Setting the date, day of the week and time
Example:
– Date / time on the watch: / 01:25 /
MON
– Present date / time: / 20:35 /
THU
1. Pull out the crown to position III ( the watch stops ).
2. Turn the crown anticlockwise until yesterday’s day of the week
WED
appears.
3. Push the crown to position II.
4. Turn the crown until yesterday’s date appears .
5. * Pull out the crown to position III ( the watch stops ).
6. Turn the crown anticlockwise until the correct date and day of the
week THU appears.
7. ** Continue to turn the crown anticlockwise until the correct
time 8:35 PM appears.
8. Push the crown back into position I.
17
23
22
23
Please note:
* To set your watch to the exact second, please refer to the
chapter entitled « setting the time ».
** Please observe the AM/PM clock rhythm.