en
16
7.
Then guide the exhaust air hose
(extraction mode) and the connect-
ing cable down from the ceiling .
The exhaust air hose should be approxi-
mately 10cm longer than the uper tower.
~
10c
8.
Slip the upper tower over the exhaust
air hose + electrical connecting cable.
Then fasten the upper tower to the ceil-
ing using washers and nuts, or using a
quick assembly flange. (Special tool
type TZ 1000,
i t e m
n o .55999800).
9.
Slip the lower tower over the
upper tower and fix using adhe-
sive tape.
10.
Fasten the (extraction mode) ex-
haust air hose to the cooker hood, mak-
ing sure that the hose is not bent.
Make the electrical connection.
(Extraction mode) When using an exter-
nal blower motor, connect the connect-
ing cable.
11.
Determine measurement (X-Y), X =
distance between hob and ceiling, Y =
distance between hob and hood.
