Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
14
Assembly page 14/33
Fax +32 2 359 95 50
BEFORE THE FIRST OPERATION
For the perfect taste, operate the jug kettle with fresh water in order to clean any residue left
from the manufacturing process. When the appliance has cooled down, repeat the process 3
times with fresh water, before rinsing.
OPERATION
Always remove the jug from the power base before filling it or before any operation.
Open the lid by pressing the lid release button and fill the jug with fresh water, paying
attention not to fill under the minimum mark and above the maximum mark on the water
level indicator.
Close the lid by pressing it down until you hear a click. Make sure it closes correctly.
Put the jug onto the power base, plug into the wall socket and switch on by pressing the
ON/OFF button. If it does not come on, check if the kettle is correctly positioned on the base
and check if the base is plugged in.
After pressing the ON/OFF button, the "100°C" indicator, the on/off indicator and the light
bar are illuminated and the water will boil to 100°C. DO NOT open the lid while the water is
boiling.
The jug kettle will switch off automatically when the water is boiling and a beep will sound.
However, you can stop the appliance any time by pressing the ON/OFF button again.
For instant reboiling, wait until the water has cooled down and switch on the appliance
again.
The appliance will enter into sleep mode if the kettle is removed from the base or if no
action is undertaken within 3 minutes. Replace the kettle on the base and press any
button to put the appliance in standby mode.
The appliance will enter into sleep mode as well if you hold the ON/OFF button pressed for
2 seconds.
You can select a preset temperature by pressing one of the temperature buttons (60°C,
80°C, 90°C or 100°C) before you press the ON/OFF button. One beep will sound when the
preset temperature is reached, the kettle will stop heating and enter into the keep-warm
mode for 30 minutes.
Note: Keep warm function only works for 60°C, 80°C and 90 °C, not 100 °C.
You can switch off the keep-warm mode by pressing the ON/OFF button or the keep
warm button.
Preparing tea recommendation
There are many kinds of tea leaves and each of them has its own taste and optimal water
temperature and steeping time. The recommended temperature and steeping time you can
find in below table:
Kind of tea
Recommended temperature
Steeping time
Number of
infusions
White tea
65 to 70
℃
1-2 minutes
3
Yellow tea
70 to 75
℃
1-2 minutes
3
Green tea
75 to 80
℃
1-2 minutes
4 to 6
Oolong tea
80 to 85
℃
2-3 minutes
4 to 6
Black tea
99
℃
2-3 minutes
2 to 3
Fruit or herbal tea
100
℃
See tea’s
packaging
-
