EN
Page | 15
9.4
Unpacking the appliance
If you open the packaging carelessly with
a sharp knife or other pointed objects, the
appliance can be damaged.
After removing the packaging, check that
all appliance parts and accessories have
been delivered. If in doubt, do not use the
appliance and contact a qualified
technician
.
✓
Remove the appliance from the
packaging.
✓
Check the delivery for completeness
✓
If the delivery is incomplete or
damaged, contact customer service at
the service address.
2
✓
Remove all protective films.
9.5
Electrical connection
WARNING
Electric shock due to faulty
connection
The appliance must be switched off when
connecting it to the mains power supply.
The switch must be set to '0'.
✓
Check the mains voltage against the
specifications on the type plate.
✓
You will find the information on this on
the type plate of the appliance.
✓
Connect the mains power cable to a
properly installed grounded plug
socket.
9.6
Intended use
The coffee maker is exclusively for the
preparation of coffee. The coffee maker
is intended exclusively for use in private
households and is not suitable for
commercial use.
Use the coffee maker only as described
in this instruction manual. Any other
form of use does not constitute an
intended use and can result in material
damage or even personal injury.
The manufacturer or dealer accepts no
liability for damage or injury resulting
from improper use or use for other than
the intended purpose.
2
For safety reasons, modifications or
alterations to the appliance are not
permitted.
10
Using for the first time
Before using the appliance for the first
time, clean it with a damp cloth.
Setting up the coffee maker
•
Place the appliance on a flat and stable
surface.
•
Insert the mains plug into a socket with
protective contacts.
Before the first brew
•
Run 2 times with
clean water only and
without paper filter
to remove dust
accumulated during production.
•
Under no circumstances use coffee powder
for this cleaning cycle.
11
Operation
To operate the appliance, proceed as
follows:
1.
Open the water tank cover.
2.
Fill cold water into the water tank
according to the desired number of
cups.
→
Fill the water tank up to the
"MAX" mark.
3.
Make sure that the filter holder is
inserted.
4.
Bend the bottom fold of the paper
filter (size 1x4).
→
The paper filter must not
protrude over the edge. Press
down a little with your hand.
5.
Insert the filter into the filter holder.
6.
Fill the filter with the desired amount
of coffee powder.
7.
Fold down the filter / water tank
cover.
8.
Place the glass jug on the plate.
9.
Switch on the appliance.
→
The control light in the
switch lights up.
NOTE
The brewing process takes about 8-12
minutes.
Automatic switch-off
After switching on, an automatic switch-
off function ensures that the appliance
does not overheat.
Содержание COFFEE 2010 S
Страница 7: ...DE Seite 7 47 Eliminação de aparelhos usados 41 48 Condições de garantia 42 ...
Страница 43: ...PT Página 43 ...