Gurari PRIME GCH C 343, Руководство по установке и использованию

Страница: 8 / 52

Cleaning by hand
If cleaned manually, first soak the grease filter extensively in hot rinse liquor, then brush well and
above all, rinse well with clean water. After that drain well. Avoid use of aggressive, acidic or alkaline
detergent. For very stubborn dirt you can resort to commercially available degreaser sprays.
Usage
The field on the far left switches the LED lighting on and off again.
The control takes place via a 4-stage sensor control on the front panel of the extractor hood.
1, 2, 3 and 4 turn on the engine at the appropriate power level. Touch again the lighted power level
switches the motor off again.
Turbo level
When the hood is switched on at the 4th speed, after 5 minutes of work the hood automatically
switched to the 3rd speed.
Timer / off timer
The extractor hood has a switchable automatic off timer (5 min). To activate this, keep the desired
power level pressed for 5 seconds. After that the timer activates automatically and turns off the
engine and lights after 5 minutes.
Remote control
The remote control controls the corresponding functions. Buttons 4 and 5, as well as button 1 turn on
the hood. Button 1 turns off the hood during operation. Button 2 turns the light on or off. With button
6 one can activate the timer and set it as described above. Button 3 does not work on this unit (no
automatic mode).