GunVault SVB 500, Руководство пользователя

Страница: 9 / 16

- 8 -
Installing the SpeedVault:
IMPORTANT : When mounting the SpeedVault Biometric make sure the drawer
has enough space to drop open. The drawer requires gravity to fully release,
always install in a vertical position (see image below)
1.
Secure the “
Mounting Bracket
” to the desired location using the “
Wall
Mounting Holes
” on the bracket and the provided wood screws.
IMPORTANT : Mounting screws provided are for solid wood surface only. If
mounting to another surface type, drywall, cement, and etc, the appropriate
hardware can purchased through a local hardware store.
2.
Remove the two “
Thumbscrews
” located on the bottom of the SpeedVault
Biometric (see image below).
3.
After removing the two “
Thumbscrews
”, open the SpeedVault Biometric
using the supplied keys. This will allow the drawer to be removed by lifting it
up and out.
4. With the drawer removed, the SpeedVault Biometric can now be mounted to
the bracket. Insert the “
Mounting Hooks
” into the “
Hook Mounting Holes
”
located on the left, right, or back of the SpeedVault. Now that the SpeedVault
Biometric is mounted to the bracket, it can be secured to the bracket by using
the supplied “
Thumbscrews
”.