Guntermann & Drunck DVIMUX8-PS/2, Руководство по установке и эксплуатации, Страница: 8 / 40

Installation
5 · G&D DVIMUX8-PS/2
Connecting the computers
Line In:
If the audio signals of the computers are to be output over the speakers which are
connected to the KVM switch, use one of the audio connection cables (
Audio-M/M
) to
connect the computer’s
Line Out
interface to this interface.
Keyb.: Use the purple plug of a Twin-PS/2 cable to connect the

purple PS/2 socket (keyboard) to this interface.
Mouse:
Use the green plug of a
Twin-PS/2
cable to connect the

green PS/2 socket (mouse) of the computer to this interface.
DVI-I CPU: If the computer is equipped with a DVI-D video output, use a digital
video cable ( DVI-D-DL-M/M ). If the computer has an analog VGA output, use an
analog video cable ( VGA-M/DVI-A-M ).
Connect the (first) video output of the computer to this interface.
IMPORTANT: KVM cable sets are required to connect the computers to the KVM
switch. All available KVM cable sets are listed on page 31.
Assign the cable sets to the different computers and have them available for instal-
lation.
NOTE: To connect the (maximum eight) computers to the KVM switch, the inter-
faces as shown below are available for each computer.
The label (e.g.
CPU 1
) assigns the interface to a specific computer and to the corre-
spondent button on the front panel.
Figure 3: Interfaces to connect the computers
NOTE: If you purchased the multi-channel variant of the KVM switch, connect the
DVI-I CPU x.2
interface to the correspending video output of the computer.
CPU 1
DVI-I CPU 1.1
Keyb. Mouse Line In
CPU 2
DVI-I CPU 2.1
Keyb. Mouse Line In
Monitor 1
Keyb. Mouse Speaker
CON CPU 7
DVI-I CPU 7.1
Keyb. Mouse Line In
CPU 8
DVI-I CPU 8.1
Keyb. Mouse Line In
Power