Guntermann & Drunck DVIMUX8-PS/2, Руководство по установке и эксплуатации, Страница: 17 / 40

Configuration
G&D DVIMUX8-PS/2 · 14
Operating the setup mode
The setup mode can be enabled using the console keyboard. After enabling, the con-
figuration of the KVM switch can be changed by using various step keys.
How to enable the setup mode:

Press the
Backspace
(Standard:
Ctrl+Backspace
) key combination to enable
the setup mode.
How to perform a setup function:
 After enabling the setup mode, press one of the setup keys described on the fol-
lowing pages.
How to end the setup mode without performing a function:

Press
ESC
to end the setup mode.
NOTE: Only one setup function can be performed after the calling of the setup mode.
If you want to perform more functions, please restart the setup mode.
NOTE: The successful activation of the setup mode is displayed by the blinking
NUM ,  and Scroll control LEDs on the keyboard. Additionally, the yellow User
LED will blink at the KVM switch.
IMPORTANT: The key combination for enabling the setup mode needs to be
pressed for
seven seconds
.
After the first call of the setup mode, the hotkey delay can be disabled by pressing
the setup key
8
(see page 21).