Guntermann & Drunck DVI-Vision-Fiber-AR, Инструкция по установке и эксплуатации

Страница: 103 / 152

Configuration
G&D DVI-Vision-Fiber · 24
English
Configuration
The configuration of the KVM extender can be changed either using the on-screen
display (OSD) or the web application Config Panel :
 The on-screen display is shown on the console monitor. Most configuration settings
can be changed directly on the OSD of the console.
 The web application Config Panel provides a graphical user interface to configure
and monitor the KVM extender via web browser.
Overview of functions and default settings
The following table provides an overview of the configurable functions of the KVM
extender. It additionally lists the default settings and references to detailed descrip-
tions of the functions.
Function Default setting Page
Changing hotkeys Ctrl 30
Changing the OSD key
Num
31
Opening the on-screen display via double keypress turned off 32
Changing the exclusive key Print 33
Changing the time span of the input lock 1 second 34
Right for exclusive access to the console given 35
Changing the video mode of consoles always on 36
Selecting the EDID mode of the KVM extender auto 38
Freeze mode disabled 39
Enabling or disabling DDC/CI support disabled 41
Selecting the USB-HID mode PC default 42
Support of special keyboards default 46
Changing the scancode set of PS/2 keyboards scancode set 2 47
Keyboard required to start the user module no 48
Adjusting the waiting period of the screensaver disabled 49
Selecting a keyboard layout for inputs via OSD German 50
Resetting the default settings 51