Reset button
20
· G&D ControlCenter-Digital-80
Reset button
The controller card
CCD-Control-Card
provides a
Reset
button between the LEDs and
the
Bus
interfaces.
This button allows you to reset the default settings and disable the netfilter rules.
Resetting the default settings
Pressing and holding the button during the booting process resets the default settings
of the matrix switch.
How to reset the default settings of the matrix switch:
1. Turn off all power packs of the matrix switch.
2. Press and hold the
Reset
button.
3. Keep the button pressed and turn on at least one of the device’s power supply
modules.
4. Release the button when the green
Switch
-LED starts blinking.
NOTE:
To prevent you from pressing the button by accident, use a thin, pointed
object to press the button.
NOTE:
After the function has been carried out, the default settings of the matrix
switch do apply again.
NOTE:
You can also use the
Config Panel
web application to reset the default settings.
Содержание ControlCenter-Digital-80
Страница 31: ... Deutsch ...
Страница 61: ... English ...
Страница 62: ... ...
Страница 63: ... English ...
