Guntermann & Drunck ControlCenter-Digital-80, Руководство по установке

Страница: 48 / 64

Installation
14 · G&D ControlCenter-Digital-80
Installing and connecting user modules
 Connect the console devices to the different user modules.
 Connect the Transmission interfaces of the individual user modules to one
Dynamic Port of a compatible IO card.
Installing and connecting target modules
The Fiber variants of the user modules use components with laser technology
which comply with laser class 1.
They meet the requirements in accordance to EN 60825-1:2014 as well as
U.S. CFR 1040.10 and 1040.11 .
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam on page 4
 Always connect optical connections or cover them with protection caps on page 4
 Only use G&D certified transmission modules on page 4
NOTE: The installation of the modules is described in detail in the separate manual
Target Modules and User Modules
.
The Fiber variants of the target modules use components with laser technology
which comply with laser class 1.
They meet the requirements in accordance to EN 60825-1:2014 as well as
U.S. CFR 1040.10 and 1040.11 .
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam on page 4
 Always connect optical connections or cover them with protection caps on page 4
 Only use G&D certified transmission modules on page 4
NOTE: The installation of the modules is described in detail in the separate manual
Target Modules and User Modules
.