Gunter & Hauer EOM 557 BTEL, Инструкция по эксплуатации

Страница: 8 / 24

7
Positioning the appliance

Ensure that the aperture that you will be fitting the oven into is of the size given in the
above diagram.

The oven must be fitted into an oven housing with the ventilation cut-outs shown in the
“Ventilation requirements” section on the next page.

Ensure that the rear panel of the furniture housing unit has been removed.

Ensure that the oven has been securely fixed into the housing unit. The fixing of the
oven into the housing is made by using four screws. These should be screwed through
the oven cabinet and into the housing unit.
Ventilation requirements
(Figure shows the ventilation and cut-out requirements for the installation of the appliance
into a tall housing unit).