12
Use and operation
The menu for setting the time and date are accessed by pressing
Clock
once. You then navigate through the menu with
,
and the selection is made with
Clock
. The settings are saved by waiting 10 seconds or by pressing
Clock
and are stopped by
briefly pressing
ON/OFF
. To return to the start screen, briefly press
ON/OFF
.
Date:
24/12/2014
Time:
18:08
Week:
Tuesday
Timer
Date format
Setting time and date
For any error messages, the applicable error codes are automatically displayed on screen. To return to the start screen,
briefly press
ON/OFF
. If the error persists, the error message will appear again on screen after 10 seconds. If there are
multiple simultaneous errors, you can view the actual error messages by pressing
See examples of error messages below. A complete list can be found in Section 4.
E03
Water flow failure
Failure number: 3
Error messages
Timer zone
Daily timer
Timer 1
06:30 - 12:30
Timer 2
06:30 - 12:30
Timer 3
06:30 - 12:30
Timer 4
06:30 - 12:30
Timer zone
Daily timer
Mon.:
NONE
Tue.:
NONE
Wed.:
NONE
Thu.:
NONE
Fri.:
NONE
Sat.:
NONE
Sun.:
NONE
Date:
24/12/2014
Time:
18:08
Week:
Tuesday
Timer
Date format
DD/MM/YY
MM/DD/YY
To set the heat pump’s behaviour from day to day, you have the option of,
depending on the day of the week, indicating whether the heat pump should
be ON, OFF or controlled according to Timer1, Timer2, Timer3 or Timer4. NONE
indicates that the timer is off for that particular day.
P01
Inlet water temp.
failure
Failure number: 3
P02
Outlet water temp.
failure
Failure number: 3
