11
10
Method of usage
Method of usage
(1).insert the plug into the socket outlet.
(2).switch on the power button behind the armrest.
SWITCH ON POWER
MASSAGE
(1)Select relative massage according to the operation
instructions of the control.
(1).stop overall massage.
(2).switch off the power button behind the armrest.
(3).pull the plug out of the socket outlet.
SWITCH OFF POWER
3.Operation sequence
(1). The correct method of operation: before operating the controller, please make
sure that the backrest electronic cylinder is connected well with the pin that fixes
the backrest.
(2). When the backrest electric cylinder is not connected with the pin that fixes the
backrest, please hold the electronic cylinder in case it touches the ground when
operate the controller.
(3). When debugging and installation, before operating the controller, please make
sure that the backrest electric cylinder is connected well with the pin that fixes
the backrest. Otherwise, after shutting down the switch, the front part of the
electronic cylinder will hit the board under the seat frame to cause bad distortion
of the seat frame, and even make the rail go out of the railway or damage the
steel-ball railway.
(1)
(2)
Caution
(3)
2).Seat Frame Installation
·
The male and female buckles of the frame assembly 8 are tightened with a tool
hammer.
·
Use two m5*16 Phillips flat head screws to lock the frame assembly.
3).Armrest Installation
·
The left and right armrests are mounted using four M6*10mm Phillips pan head
screws.
·
Use 2 8*30 hex socket head cap screws to lock the left and right armrests.
4).Cup Holder Instructions
·
This is the state of the tea cup.
·
After the cup holder is placed back to the back of the armrest, the cup holder can
be put down.
