manualshive.com logo in svg

Gulfstream G150, Руководство по эксплуатации самолета

Поделиться
Скачать
Gulfstream G150 Скачать руководство пользователя страница 6

Section VII
Systems

VII-22-6

Approach Mode (Vertical) 

Approach mode is selected by pressing the APPR button on the FGP.
The approach mode arms when selected and the system generates
commands to capture and track vertical guidance for precision
approaches (glideslope or GPS when approved) when the lateral
approach mode is in the track state and the vertical capture
requirements are met.

Vertical Navigation (VNAV)

The vertical navigation function enables the FMS to command various
FGS vertical modes and provide references for these modes. VNAV is
armed by pressing the VNAV button on the FGP except in ILS/MLS
vertical approach capture/track or when FLC overspeed mode is
active. Selection of VNAV does not automatically change the active
guidance mode. When VNAV is armed, the FMS can automatically
select the FGS vertical mode if required. The FGS generates
commands to follow the pitch command signal from the FMS when
coupled VNAV guidance is active in PATH and VGP modes. The pilot
can manually change any of the FCS mode selections made by the
FMS. Pilot action suspends the current FMS VNAV control of the FGS,
but does not preclude automatic reassertion of control by the FMS.

Go Around Mode (Vertical) 

Go around mode is selected by pressing the GA button on control
wheel. When in vertical go around mode, the system generates a fixed
9° pitch up command.

Overspeed Mode

Overspeed mode is automatically selected when an overspeed occurs,
unless altitude hold mode or preselect altitude capture or track states
are active. When in overspeed mode, the system generates
commands to reduce the airspeed at 0.865 - 0.87 M

i

. Airspeed bug

moves to 0.84 M

i

.

 

The system remains in overspeed mode until

changed by the pilot or an automatic mode change occurs.

10 Sep 2006

Содержание G150

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды