Guldmann GH3 Twin страница 7 Скачать руководство пользователя

Страница: 7 / 64

Guldmann

GB/US

-02/2021 • # 550216_19

Guldmann GB/US

-02/2021 • # 550216_19

1 .05 Important/Precautions

•

Read the instructions carefully before using the GH3 and in connection

with cleaning and service of the hoist.

•

The GH3’s maximum load must never be exceeded.

•

The GH3 may only be used to lift a person.

•

The red strap for the emergency stop and the emergency lowering must

be adjusted to the helpers reach, and must not be removed.

•

The GH3 must not be used where there is a risk of it being splashed with water.

•

If a defect appears during use of the GH3, stop using the hoist and contact

the Guldmann Service Team for repairs.

•

The GH3 is controlled by a microprocessor PCB, which can be damaged by

static electricity if touched without the necessary precautions, (

see point 1.08)

•

The electronics may only be serviced by Guldmann approved service

technicians.

•

The lifting hanger must not be mounted or replaced when the GH3 hoist is

positioned over the patient.

• Do not modify this equipment without the authorization of the manufacturer

• The GH3 needs special precautions regarding EMC and needs to be installed

and put into service according to the EMC information provided in Chapter 11

EMC Information.

• Portable and mobile RF communications equipment can affect the GH3.

• Accessories, transducers and cables must always be original Guldmann com

ponents. The use of other spare parts than those supplied by Guldmann A/S

may result in poor EMC protection. This may cause damage to the GH3 lifting

module as well as electrical products in the nearby surroundings.

• The GH3 should not be used adjacent to or stacked with other equipment

and if adjacent or stacked use is necessary, the GH3 should be observed to

verify normal operation in the configuration in which it will be used.

• Transport of this equipment should only be undertaken after conditions

described in section 3.00 (Environmental conditions).

• Nothing should be connected to the USB port when the device is in use with

a patient.

• Any serious incident that occurred in relation to this device should be reported

to the manufacturer and the local competent authority.

Re: EMC

If electromagnetic or other influences occur between this product and other

products, these products must not be used together.

1 .06

Load limits on GH3 system

Read the label which indicates the maximum load limits for each component.

The component, e.g. lifting hanger, lifting sling, etc. labelled with the lowest

load limit determines the maximum load limit for the entire system.

This maximum load limit must not be exceeded.

Please note that the max load may change when different components are

used, such as lifting hangers, lifting slings, etc.

Содержание GH3 Twin

































































Результаты поиска

Содержание GH3 Twin

Отзывы:

Похожие инструкции для GH3 Twin

Бренды по названию

Популярные бренды

Guldmann GH3 Twin, Руководство пользователя

Результаты поиска

Содержание GH3 Twin

Отзывы:

Похожие инструкции для GH3 Twin

Бренды по названию

Популярные бренды