Guldmann GH2, Руководство пользователя

Страница: 7 / 24

7
so that its top is at the same height as the top of the user’s head. Now lay the
sling over the user so that the centre band follows the user’s spine. Turn the
user onto his or her back and pull out the remaining part of the lifting sling.
Place the leg straps beneath the user’s thighs and cross them over each
other. All four lifting straps are now ready to be attached and the lifting sling
can now be mounted on the lifting hanger. It is an advantage to elevate the
head of the bed so that the user is sitting up.
Only persons who have received competent instruction regarding the use of
lifting equipment and fitting of slings should start using the hoist.
1.08 Before the hoist can be used
Battery connection
Attach 4-pole plug in accordance with the enclosed
instructions. The measures regarding ESD-safety
are valid in this connection. See point 1.09.
Emergency stop device
The emergency stop device must be reset in order
to connect power to the product. To do this, push
the contact arm, to which the red emergency stop
band is fastened, towards the product until it clicks.
1.09 Power supply
GH2 is equipped with batteries that require regular recharging. The power
supply for charging and the battery charging point must be connected by a
qualified engineer or by the Guldmann Service Team.
The transformer/recharger supplied must always be used.
AC power supply
When the power is supplied via the rails (Midi-rails), an AC transformer
Guldmann type DTS-2420, item No. 937000, must be used. For connection
please refer to the installation guide.
If AC power supply is used (MIDI rails), the hoist will after use be constantly
recharged throughout the length of the rail.
DC power supply
When the power is supplied via the charging station, a DC charger Mascot
type 2240, item No. 937030, must be used. For connection please refer to the
installation guide.
If DC power supply is used (MINI, MAXI and JUMBO rails), the hoist shall
after use be placed in the charging station for recharging. The charging
station is marked with
on the rail.
Safety concerning static electricity (ESD)
Service technicians and installers must use an ESD-safety package
consisting of a mat, a ground wire, and a bracelet. The technician/installer
connects the mat to a grounding point, for instance a radiator or a water pipe.
He must then put on the bracelet and connect it to the mat. If the technician
©
Guldmann
G
B
/U
S
-12
63/0
1
/0
8
•
#
90069
©
Guldmann
G
B
/U
S
-12
63/0
1
/0
8
•
#
90069