5
• If GH2 F fails while in use, it should not be used further, and the local
Guldmann Service Team must be contacted for repair.
• If GH2 F is used where the distance between the rail system and the floor
exceeds three metres (or 118”), the lifting strap must be extended with an
extension strap.
• GH2 F is controlled by a microprocessor PC Board, which may be damaged
by static electricity if touched without the necessary precautions. See point
4.01. Thus, the electronics should be looked after be qualified technicians,
only.
1 .04
Load limits on your GH2 F system
Read the labels which indicate the maximum load limits of the components.
The component which has the lowest load limit, e.g. the lifting hanger, the
lifting sling, or other equipment, determines the maximum load limit of the
entire system. The maximum load limit must not be exceeded.
Please note that the load limit may change when different components are
used on a daily basis, e.g. lifting hangers, lifting slings.
2 .00
Unpacking and preparation
Visual check of GH2 F
If it appears that GH2 F has
been damaged when you unpack
it, it must not be used until it has
been checked by a qualified
person or by the Guldmann
Service Team.
Contents of the boxes
GH2 F hoist module
1. GH2 F (1)
2. Hand control (2)
3. Charger
4. Manual
Travelling trolley for GH2 F
1. Travelling trolley for GH2 F (3)
2. Manual
3. Label for rail system
Transport trolley for GH2 F
(4)
1. Handle
2. Underframe
3. Bag for sling
4. Two holders for X lifting hanger
5. Nuts and bolts
6. Manual
3
1
2
4
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
©
G
ul
dm
an
n
U
S
-8
82
/1
2/
20
11
•
#
900690_1.01
