Guldmann GH1 F, Руководство по обслуживанию

Страница: 96 / 168

1
1
1
2
2
© Guldmann
GB/US
-09/2016 •
#550376_3
98
SERVICE AND
REP
AIR
GH Combi lock
Check visualy that the covers (1 & 2) do not show signs of
cracks or damage, otherwise change the damaged cover .
Check that the track part (1) is free of dust and shows no
signs of cracks or damage .
Check that the safety lock’s tongue (2) is flush with the rail
end (if not, change it) .
Check that the track part (1) is free of dust and shows no
signs of cracks or damage .
Check points
• Check for corrosion (in case of corrosion, replace
safety locks)
• Check for dust at the two track parts . (if so, clean them)
• Check that the safety locks do not show signs of being
bent or damaged . (if so, replace the safety locks)
• Check that the safety locks are installed with safety
screws . (if not, do it)
• Check that the gap between the rails is 3 mm . (if not,
change it)
• Check that the safety locks’ tongues are flush with the
rail ends (if not, change it) . It is important that the gap
between the rails is correct . The gap between the two
Combi lock tongues shall be 3 mm
• Check that the plastic parts do not show signs of cracks
or damage (If so, change the plastic part) .