Guldmann GH1 F, Руководство пользователя

Страница: 7 / 36

7
The side cover is dismantled by inserting for instance a lat screwdriver in the
opening between the groove and the cover and tilt the cover upwards and out.
The side cover is itted on the side of GH1 F by bending the cover slightly
and placing it in the groove on the side of GH1 F.
1.07 Placing a new GH1 F hoist in an existing rail system
Please notice, when placing a new GH1 F hoist in an existing rail system it
must be ensured that:
• The rated max load of the rail system, must be equal or higher than the max
load of the new hoist.
– If there is no max load mentioned on the rail system, the rail system must
then be checked according to the guideline in the installation manual
(distance between bracket according to max load).
– If the brackets are not visible, then a load test with 1.5 x max load of the
hoist must be performed minimum 20 min. During the test the delection of
the rails must not be higher than 1/200 of the length of the rail.
– If it is not possible to do any of the above mentioned, please contact
Guldmann or their representative.
• If the rail system can not be rated to the same max load as the hoist, then
extra brackets must be installed according to the installation manual (distance
between brackets according to max load).
1.08 Power supply
GH1 F is equipped with a battery that requires regular recharging.
The power supply must be connected to the power socket.
The enclosed power supply must always be used.
Safety concerning static electricity (ESD)
Service technicians and installers must use an ESD-safety package
consisting of a mat, a ground wire, and a bracelet.
The technician/installer connects the mat to a grounding point, for instance a
radiator or a water pipe. The technician/installer must then put on the bracelet
and connect it to the mat. If it is not possible to ind a grounding point, the
mat and the bracelet must be used as a minimum.
Only then is it allowed to work with the PC Board or components where it
is possible to come into contact with the PC Board.
© Guldmann GB/US-1831/12/2016 • # 5
5
1
2
1
4
_
1
0