Guilin Woodpecker Medical Instrument AP-A, Инструкция по эксплуатации

Страница: 6 / 26

4
Fig. 4 Airpolishing handpiece
2.2 Main unit installation
1) Open the package, check whether all the accessories of this device
are complete according to the packing list, and put the main unit on
the stable desktop to the operator.
2) Take out the foot switch and insert the connector into the
corresponding foot switch socket on the back of the main unit.
3) Take out the external air pipe and connect the air pipe joint with the
air inlet interface on the back of the main unit.
4) Put the power switch in the off state, insert the output plug of the
power adapter into the power socket on the back of the main unit, and
then insert the input plug of the power adapter into the power socket.
5
）
Release the foot pedal, the handle can stop working, and press the
power switch to shut down.
[Warning 1] To avoid the risk of electric shock, this equipment must
only be connected to a supply mains with protective earth.
[Warning 2] When the power adapter is connected to the network
power supply, do not place or install the product in a place where it is
difficult to cut off the network power supply.
[Warning 3] Unauthorized modification of this equipment is not
allowed.
[Warning 4] This equipment cannot be used in areas where liquids
may appear on the floor such as emergency rooms or surgical
operating rooms.
[Warning 5] This equipment can only be used by professionals with a
physician or nurse license.
[Warning 6] The device is expected to be connected to an
independent power supply, and the power supply shall be specified as
part of the device or the combination of device and power supply shall
be specified as the ME system.
[Warning 7] Use of this equipment adjacent to or stacked with other