4. Charging
Micro-USB
USB cable
USB Port
5V USB power adapter
(Equipped by user )
After power off, connect the USB cable to USB port, and connect with 5V USB power adapter (equipped by user)
by USB cable .
Or take out the battery, and use the corresponding charger to charge the battery (equipped by user).
The red indicator light is on during charging, and green light is on after the battery is fully charged.
3. Modes / Functions
The phone stays in its current orientation.
The panning, tilting and rolling direction are all fixed.
Working Modes
Panning Mode
The phone can move to left or right smoothly along with the handheld moving.
The tilting and rolling directions fixed.
Panning and Tilting Mode
The phone can move to left or right and tilt up and down smoothly along with the handheld moving.
The rolling directions fixed.
Lock Mode
Convenient for the iPhone users to shot panorama photo.
As shown, roll the gimbal slowly to the right (or left) 90°, the rolling axis
automatically follow to the right (or left) is rotated by 90°.
Panorama
Reset the tilting axis of the gimbal to initial orientation and initial mode.
Reset
In standby mode, keep the gimbal in power-up state, the motor stops working, the indicator light flashes for three
times, and single tap again the function button to wake up the gimbal.
Standby
Other Functions
* Boot default mode: Panning mode
Function Button
Double tap
Single tap
Function
Explanation
Panning Mode / Lock Mode
Panning and Tilting Mode
Single tap to switch between panning mode and lock mode
Under panning and tilting mode, single tap to switch to lock mode
Make the lens rotate 180 °
Triple tap
Rotate 180°in horizontal
Reset the tilting axis of the gimbal to initial orientation and initial mode
Quadruple tap
Reset
Long press until
the red light
flashes quickly
Single tap again to awake the gimbal, or triple tap to initialize the gimbal
Standby
Mode / Function Operation Instructions
