Guildline 6622T Series, Руководство по эксплуатации

Страница: 48 / 116

Section 4
OM6622T-A-00
30 January 2018
4-10
4.4.5. Operation of Select/Edit Data Menus
4.4.5.1. Function - <Scrn n-N>
If more than one screen of display information is available for selection as
current at a menu level, then a <Scrn n-N> software function key will appear
above the fourth function key <Fn-4>. The numeric "N" represents the total
number of screens available for view. Pressing the <Scrn n-N> function key
will cause the display to move to the next sequential screen. Pressing the
key on the last screen will cause the display to move back to the first screen.
4.4.5.2. Function - <Edit>
Pressing the < Edit > key will cause one of the currently selected items or the
first item in a list to be highlighted. The cursor arrow keys can then be used
to move the highlight from selection to selection on the screen.
If the screen type is a selection screen, for example the <Resistor select
menu function>, the highlighted item will be selected active, only when the
soft function key <Ok> is pressed.
While in an <Edit screen function>, the highlighted item can be modified by
using direct entry from the numeric key pad. If the cursor movement
<left/right arrow> keys, or <CLEAR> key have not been pressed then any
numeric entry will clear the current line and display the pressed key at the
cursor position. Pressing any one of the cursor movement keys will cause
the current character under the cursor to be replaced with the next numeric
key pressed.
The <CLEAR> key, when editing data will clear the current data.
4.4.5.3. Function - <Ok>
Pressing the soft function <Ok> key will either load the item selected or
accept all the changes that have been made in the current menu (including
the screens not currently displayed if there are multiple screens).
At any time before pressing the <Ok> key, the <CANCEL> key can be
pressed to undo all changes that have been made.