Customer Helpline
0333 3201989
9
OPERATION
1� PIVOTING FOOT PLATE ADJUSTMENT (SEE FIG C)
The adjustable pivoting foot plate (2) adapts to the required angular position of the surface.
It must be held firmly against the material being cut to reduce saw vibration, blade jumping
and blade breakage.
If you need to reduce the cutting capacity of your tool (depth of cut), the pivoting foot plate (2)
may be adjusted as follows. Loosen the two securing screws (a) on the underside of the front
housing with a allen key (8). Slide the pivoting foot plate (2) to the required position. Tighten
both screws (a) and check that the pivoting foot plate (2) is firmly latched. (SEE FIG C)
2� SWITCHING ON AND OFF (SEE FIG D)
Depress the On/Off switch (4) to start and release it to stop your tool. Depress the on/off
switch (4) then the lock on button (5). Your tool is now locked on for continuous use. To
switch off your tool just depress and release the on/off switch (4).
3� VARIABLE SPEED CONTROL (SEE FIG E)
The On/Off switch (4) is also a variable speed controlled trigger switch. The blade plunger stroke
rate can be adjusted from the minimum to maximum by the pressure you apply to the On/Off
switch. Apply more pressure to increase the speed and release pressure to decrease speed.
Operating Instructions
8
a
C
D
E
