background image

Customer Helpline

 0333 3201989

13

Technical Data

Voltage 

220-240V~50Hz

Power consumption

500 W  

Nozzle size

2.5mm

Max air volume flow

600ml/min

Max viscosity

60DIN-s

Air hose length

1.8m

Tank capacity

800 ml

Spraying pressure

0.1-0.2bar

Protection degree

/II

Weight

1.82kg

Technical Data Table

A weighted sound pressure      

L

pA

 :83dB(A)

A weighted sound power           

L

wA

 : 94dB(A)

  

K

pA

 & K

wA

=3.0dB(A)

Wear ear protection  

 

 

 

 

     

Noise Information 

Vibration total values (triax vector sum) determined according to EN 60745 & EN50580:
Vibration emission value a

h

 = 2.687m/s

2

Uncertainty K = 1.5m/s²

Vibration Information

WARNING: 

The vibration emission value during actual use of the power tool can 

differ from the declared value depending on the ways in which the tool is used 

dependant on the following examples and other variations on how the tool is used:

How the tool is used.

The tool being in good condition and well maintained 

Using the correct accessory for the tool and ensuring it is in good condition.

The tightness of the grip on the handles and if any anti vibration accessories are used.

And the tool is being used as intended by its design and these instructions. 

This tool may cause hand-arm vibration syndrome if its use is not adequately 

managed

WARNING: 

To be accurate, an estimation of exposure level in the actual conditions 

of use should also take account of all parts of the operating cycle such as the times 

when the tool is switched off and when it is running idle but not actually doing the job. This 

may significantly reduce the exposure level over the total working period.

Содержание PRG500G

















Отзывы: