Guild PRG500G, Инструкция по эксплуатации

Страница: 10 / 16

Customer Helpline
0333 3201989
10
10. ADJUSTMENT OF THE SPRAY GUN
Selection spray patterns
1) Unscrew the cup nut.
2) Setting the position of air cup to the desired situation.
The Horizontal position of air cup(SEE FIG. G1)=the spraying shape is vertical: for vertical surface.
The vertical position of air cup (SEE FIG. G2)=the spraying shape is horizontal: for horizontal
surface.
The oblique position of air cup (SEE FIG. G3)=the spraying shape is circular: for corners,
edges and others.
3) Screw the cup nut and tighten it.
WARNING!
Never change the setting of the air cup when pulling the trigger.
Adjustment of the rate of flow (SEE FIG. H)
The material volume by turning the flow rate adjustment screw.
+ Rotate anticlockwise: reduce the rate of flow
- Rotate clockwise : increase the rate of flow
Operating Instructions
G1
G3
G2
H