Customer Helpline
0333 3201989
11
15
o
-30
o
Operating Instructions
3. FITTING THE DISCS
Put the inner flange onto the tool spindle. Ensure it is located on the two flats of spindle.
Place the disc on the tool spindle and inner flange. Ensure it is correctly located. Fit the
threaded outer flange making sure it is facing in the correct direction for the type of disc
fitted. For grinding discs, the flange is fitted with the raised portion facing towards the
disc. For cutting discs, the flange is fitted with the raised portion facing away from the disc
(SEE FIG C1, C2).
Press in the spindle lock button (2) and rotate the spindle by hand until it is locked.
Keeping the lock button pressed in, tighten the outer flange with the spanner provided.
(SEE FIG C3)
NOTE:
Check that the grinding wheel is correctly mounted and that it can turn freely, make
sure that the grinding wheel does not catch against the protecting guard or other parts.
4. SPINDLE LOCK BUTTON
Clean the grinder spindle and all parts to be mounted. For clamping and loosening the
grinding wheel, lock the grinder spindle with the spindle lock button.
WARNING:
Actuate the spindle lock button only when the grinder spindle is at a
standstill!
5. HAND GRIP AREAS (SEE FIG D)
Always hold your angle grinder firmly with both hands when operating.
C1
C2
C3
D
8
Grinding disc
9
8
Cutting disc
9
