Guild PFS260GH, Инструкция по эксплуатации

Страница: 9 / 16

Customer Helpline 0333 3201989
9
Operating Instructions
2. USING THE CYCLONIC DUST BOX
A) ATTACH THE CYCLONIC DUST BOX (SEE FIG E1)
Your sander is equipped with a cyclonic dust box. To attach, slide the box onto the outlet
piece and take care that the latching lever engages.
Caution: To prevent the possibility of sanding dust or foreign body being thrown
into your face or eyes, never attempt to use your sander without the dust box
properly installed.
B) EMPTY THE CYCLONIC DUST BOX (See Fig E2 E3)
For more efficient operation, empty the cyclonic dust box every 5-10mins. This will
permit the air to flow through the box better.
To empty the box, press the latching lever in and pull off the box. Then press the button
at the rear of the box to open it, and shake out dust.
3. OPERATING THE ON/OFF SWITCH (SEE FIG F)
Slide the on/off switch to the position marked”I” to start the tool.
Slide it to the position marked “0” to stop it.
E3
E1
F
E2