7
After Sales Helpline 0345 640 2020
As requested (weekly), hand wash the Dirt/Liquid Container, and Filter in warm soapy water.
Use only mild soap and detergents. Other detergents, cleaners, or solvents may damage
the plastic.
Once the filer is washed / cleaned please allow to dry overnight before replacing and using.
To re-insert press the Filter onto the Dirt / Liquid Container (part 3). You may need to press
around the edge of the Filter to make it fit properly into the Dirt/Liquid Container.
Place the Dirt/Liquid Container back onto the Handle Housing by placing the lower rear
edge of the container against the lower front edge of the housing. The latch at the lower
front edge of the housing should fit into the lower latch hole of the container.
Swing the container so the upper rear edge of the container is against the upper front edge
of the housing. The Dirt/Liquid Container Release Button on the housing will snap into the
upper latch hole of the container.
Cleaning the Vacuum Housing:
Clean the vacuum housing with a damp cloth. Do not use detergents, cleaners, or solvents.
Note: Never clean the vacuum by immersing the vacuum in water!
Note: For dry vacuuming make sure that the Filter is dry before you operate the vacuum. If it
is not dry the performance may be reduced. The Filter should be replaced periodically to
provide optimal vacuum performance, or when the Filter has been damaged.
Note: contact aftersales 0345 640 202 to obtain spare parts.
Operating And Maintenance
STORAGE
Before storing, t
.
