Customer Helpline 0333 3201989
14
1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE SWITCH?
The forward/reverse rotation control, which is on top of the trigger, is positioned in the lock
function. Unlock the forward/reverse rotation control by putting it into the required rotation
position. Push the trigger and the drill will start to rotate.
2. THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY TIGHTENED. WHY?
Verify the torque position of the torque adjusting ring, you can find the torque-adjusting ring
between the chuck and the drill body. Position 1 is the lowest torque (screw driving force) and
position 18 is the highest torque (screw driving force). Position is for drill operation. Regulate
the torque adjusting ring to a higher position to reach the best result.
3. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES
Charging time problems, as above, and having not used a battery pack for a prolonged time
will reduce the battery pack working time. This can be corrected after several charge and
discharge operations by charging & working with your drill. Heavy working conditions such as
large screws into hard wood will use up the battery pack energy faster than lighter working
conditions. Do not re-charge your battery pack below 0
°
C and above 45
°
C as this will affect
performance.
Maintenance
Trouble Shooting
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is normal and will not damage your power tool.
