Customer Helpline 0333 3201989
6
Safety Information
Important - Please read these instructions fully before starting assembly
Safety Instructions
– for tools provided with an isolating transformer: Never use the tool without the
transformer delivered with the tool or of the type as specified in these instructions,
– Replacement of the plug or the supply cord shall always be carried out by the
manufacturer of the tool or his service organisation,
– Keep water clear off the electrical parts of the tool and away from persons in the
working area.
1� Remove the mains plug from socket before carrying out any adjustment servicing�
Important additional safety notes for your Electric Tile Cutter�
2� Always wear both eye and ear protection when using the machine�
3� Ensure that the directional arrow marked on the blade corresponds with the rotational
direction of the motor�
4� Always keep the blade securing arbor and collars clean�
5� With the machine disconnected from the power supply, rotate the blade by hand to
ensure it is free from obstruction�
6� Ensure that the blade-securing bolt is securely tightened with a suitable wrench�
7� Never try to cut freehand� Always ensure that the tile to be cut is pressed firmly
against the parallel guide�
8� Ensure that the work piece to be cut off has sufficient room to move sideways� Failure
to do so may result in the off cut binding against the blade�
9� Never cut more than one tile at a time�
10� Never cut pieces too small to be held securely against the side fence without leaving
enough space for the hand to be a safe distance from the blade�
11� Ensure that the table and surrounding area are clear with the exception of the tile to
be cut�
12� Never fit substandard blades to the machine� Only fit correctly sized diamond blades�
13� Before cutting a tile piece let the saw blade run freely for a few seconds� If it makes an
unfamiliar sound or vibrate excessively switch it off immediately and disconnect from
the power supply� Investigate the cause or consult a qualified person for advice�
14� Let the blade reach full speed before commencing the cut�
15� Do not force the blade to cut the tile�
16� Let the blade come to a complete stop before removing any jammed or off cut material
from around the blade area�
17� Always use the appropriate safety equipment that is required for the product� e�g�
Goggles / Safety Spectacles, Ear defenders (essential with tools with a noise rating of
over 85 dB(A)), Gloves and face masks� In all cases ensure that the safety equipment is
in good condition�
Additional safety rules for Tile Cutter
