Customer Helpline 0333 3201989
12
Operating Instructions
INSTALL THE PARALLEL CUTTING GUIDE AND ANGLE CUTTING GUIDE (SEE FIG D1-D6)
Tighten the two fixing knobs of Parallel cutting guide (8) to both sides of the Parallel cutting
guide (1) (Note: please tighten the fixing knobs with the gasket (n) of the Parallel cutting
guide, ensure that the fixing knobs not over the gasket ).
Locate the parallel cutting guide (1) to seat at both sides of the cutting table.
Move the parallel cutting guide (1) to the desire place, then tighten the two fixing knob of
parallel cutting guide (8).
Align the angle cutting guide (2) to the parallel cutting guide (1) and move the direction of the
angle cutting guide (2) to the desire place, then tigthen the fixing knob of Angle cutting guide (9).
n
D1
D2
D3
D4
D5
D6
Before you start
