Customer Helpline
0333 3201989
14
Maintenance
Remove the blade,
(we recommend the use of a stout glove for this).
Clean any saw dust
and debris from the arbor and saw blade securing flanges.
To refit the blade, follow the above procedure in reverse order.
CAUTION: ALWAYS
install the blade with the blade teeth and the arrow printed on the side
of the blade pointing down at the front of the saw. The direction of blade rotation is also
stamped with an arrow on the upper blade guard.
3. REPLACING THE CARBON BRUSHES
Check the carbon brushes regularly. If the carbon brushes are worn down to about 4mm,
replace them with the new set (not supplied). It must be replaced in pairs.
With a suitable slotted screwdriver turn the cap anti-clockwise until the carbon brush is
released, replace the brush and make sure that they locate well and are secured within the
brush retainer.
4. MOVING THE SAW
1) When transporting the saw with fixed locations, make sure that the saw head is locked in
the lower position.
2) The rotary table locking knob, the bevel lock lever and the slide rod securing knob, must
all be securely tightened.
3) Use the transportation handle to lift the saw. Do not lift the saw by the switch handle.
16
17
a
19
7
18
19
c
20
b
2
b
b
21
A
B1
B1
B2
C
D
E1
E2
F
G1
G2
H1
H2
I1
I2
J1
J2
K1
K2
L1
L2
L3
L5
L4
