Customer Helpline
0333 3201989
17
Assembly Instructions
6. Adjusting the tool table (15) to 90o (See Fig I1,I2)
Move the Upper Blade Guide (11) to the top.
Undo the fixing handles (18).
Set the angle between the blade (26) and the table (15).
Turn the Setting Wheel (19) to tilt the Saw Table (15) until it is at an angle of exactly 90o to
the blade (26).
Re-tighten the Fixing Handle (18).
Undo the Nut(37).
Adjust the Allen Screw (36) until there is contact with the tool frame.
Re-tighten the Nut (37) to fasten the Allen Screw (36).
7. Blade selection
The blade supplied with the bandsaw is designed for all-purpose use. When you select a
blade you should have regard to the following criteria:
Use a narrow blade to cut small angle.
Wide blades are used to saw straight cuts. This is particularly important in cutting wood
because the blade has a tendency to follow the grain of the wood and thereby deviate easily
from the cutting line.
Finely toothed blades provide smoother cuts but are slower than coarse blades.
Warning: Never use warped or lacerated blades!
I1
I2
11
36
37
