15
Regulator address setting
Regulator address for preset communication protocol
RS485 network regulator address
Communication speed
Communication speed for preset communication protocol
communication speed setting
Visualization of binary inputs
Visualization of inputs is done by three LED diodes. This option defines at which binary input
status should LED diode indication lights – LED diode lights if binary input is OPEN or CLOSED.
LED lights if binary input is OPEN LED lights if binary input is CLOSED
Binary input 1,
(similarly 2,3)
Temperature unit choice
It is possible to measure temperature at °C or °F. There is shown preset unit. It is possible to change
it after „
SET
“ key pressing.
preset to °C
preset to °F
