Doc No 93-0491-4
UNCONTROLLED COPY ONCE PRINTED
PAGE 15 OF 21
Power down the unit and remove the AUP from the Artemis and place the two jumper links back onto the
AUP, refit the AUP. Remove the ‘T’ piece adaptor and place the SUM and DIF cables back onto the IF Pre-
amp.
7.
Fixed Delay Adjustment
Remove the power meter adaptor plate from the antenna flange and fit the TDC fixed delay meter, making
sure it is securely bolted down.
Power up the Artemis and using the ASI software set the following parameters.
stty:
Fixed Station
txpm:
Manual
simu:
Open Loop
txpw:
Normal (high power)
