15
5. MAINTAINING THE CHARGER
Periodically clean both battery terminals with baking soda and tighten all connections.
No other maintenance on the charger is required.
6. SPECIFICATIONS
Model
Output
Volts
Output
Amps
Banks DC Cable
Size
Size (inches)
L x W x H
Input Volts
Input
Amps Max
2607A
12/24
3/3
2
4’/4’
3.5 x 6.4 x 2.25
115VAC
50/60Hz
2 Amps
2608A
12
6
1
4’
3.5 x 6.4 x 2.25
115VAC
50/60Hz
2 Amps
2610A
12
5/5
2
N/A
4.25 x 7 x 2.42
115VAC
50/60Hz
2.5 Amps
2611A
12/24
5/5
2
4’/4’
4.25 x 7 x 2.42
115VAC
50/60Hz
2.5 Amps
FCC Class A EMC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to case harmful interference in which case
the user will be required to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning this equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
