Getting Started
Charging the Battery
Before using the magnifier, you must charge its battery.
1.
Plug the small end of the power adaptor into the Power/Video port
⑧
located on the left side of the unit. Then plug the other end of the power
adaptor into a standard AC outlet. The battery indicator LED
②
on the front
of the unit will be in red to show that the battery is charging.
2.
When the battery is finished charging, the battery indicator LED will be in
green. Unplug the unit. Then the battery indicator LED will turn off.
3.
You can now use your magnifier for up to four hours of continuous use.
When the battery is low, there will be low-power indicator
blinking
on the right top corner of the panel. Then you have to connect the power
adaptor and plug it in to recharge the battery.
Note:
Always turn the magnifier off during charging. The battery will not charge if
the magnifier is left on.
6