GO1200ac Manual
www.guepardnetworks.com
•
RTS Threshold: RTS stands for ‘Request to send’ and is send by the client to the access point – it
essen ally asks for permission to send the next data packet. The lower the threshold, the more
stable your Wi-Fi network, since it essen ally asks more o en when sending packages. However, if
you don’t have problems with your Wi-Fi you should make sure that the RTS Threshold is set to the
maximum allowed.
•
TX Power: This func on allow to increase transmi ng power which will device transmi ng longer
distance and passing more barrier (wall,
fl
oor, tree canopy…)
•
DFS:
Dynamic Frequency Selec on (DFS) is a WiFi func on that enables WLANs to use 5 GHz frequencies that
are generally reserved for radars. If you are planning to use DFS channels, you
fi
rst have to verify that both
your WiFi access points and wireless clients support this func onality.
•
2G Distance: choosing suitable distance scenario for pair CPEs in 2.4GHz frequency.
•
5G Distance: choosing suitable distance scenario for pair CPEs in 5.8GHz frequency.
4) Network:
Se ng up Network on device.
AP Mode:
When AP run in AP Mode
P19. WiFi con
fi
gura on in AP mode.
LAN Se ngs
(AP Mode)
•
IP Mode: choosing method to get IP from LAN
(Such as: Sta c IP/Get IP from AC/Gateway).
•
Click
Apply
bu on for
fi
nish.
VLAN Se ngs:
con
fi
guring VLAN per SSID. For using this func on, checking
On
in drag list at the
bo om GUI.
14 |
P a g e
