Fig. 22
•
Put wrench 13 on the disc spindle .
Fig. 23
•
Take the belt from the pulley using the screwdriver while turning
the disc spindle in the direction of the small pulley.
Fig. 24
•
Turn until the belt is completely taken off the small pulley .
Fig. 25
•
Now, take the belt off the big pulley.
•
Push the worn belt through the pulley and dispose of it in a
professional way. .
Fig. 26
•
Push a new belt through the gap between the pulleys .
•
First, see to the motor belt wheel for the grooves to fit in correctly
.
Fig. 27
•
Put wrench 13 on the saw spindle again .
Fig. 28
•
Put the belt on big wheel now .
•
Turn the screwdriver very firmly in the direction of the belt pulley
.
30
