22
EN
Technical Data
Welder
MIG 172/6W
Art. No
20074
Degree of protection
IP 21S
Insulation class
H
Anschluss
230 V
~
50 Hz
Rated input voltage (AC Current) U
1
230 V
Mains frequency
50 Hz
Protection
16A
Maximum rated input current I
1max
27,2 A
Maximum effective input current I
1eff
9,2 A
Max. input
230 V ( 3,2 kVA )
Protection, time delay
16 A
No-load voltage U
0
40 V
Load voltage U
2
15,25 V
16,1 V 16,7 V 17,85 V 19 V
20,75 V
Welding current I
2
25 A
42 A
54 A
77 A
100 A
135 A
Switch-on time X *
100 %
60 % 30 %
20 %
10 %
Regulated section Welding current
25-135 A
Material thickness
1 - 8 mm
Wire thickness
0,6 - 1,0 mm
Dimensions L x W x H
685 x 295 x 440 mm
Net/gross weight
32 kg / 38 kg
* The ratio of given duration time/the full-cycle time.
Note 1: This ratio shall be within 0~1, and can be indicated by percentage.
Note 2: In this standard, the full-cycle time is 10 min. For example, if the duty cycle is 60 %, the load-applying
time shall be 6 min and the following no-load time shall be 4 min.
Switch-on time determined at 40°C using simulation
Read and understand the operating
instructions before using the appliance. Familiarise
with the control elements and how to use the
appliance properly. Abide by all the safety measures
stated in the service manual. Act responsibly toward
third parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions of Use
Protective gas welding device for the thermal con-
nection of ferrous metals by melting the edges and
feeding in an additive.
Only wire electrodes which are suitable for the
device may be used.
Observing the safety instructions, the assembly in-
structions and the operating instructions in the user
manual also constitutes part of the proper use.
The valid accident prevention regulations must be
adhered to strictly..
ENGLISH
Содержание MIG 172 6W
Страница 113: ...109...
