Gude Expert Power Control 1202, Руководство пользователя

Страница: 63 / 93

63
Expert Power Control 1202/1292 © 2018 Gude Analog- und Digitalsysteme GmbH
Specifications
Resettable Reverse Reactive Energy counter.
epc1202OVPIndex .43.1.5.2.1.1.x Integer32 RO
None
epc1202OVPStatus .43.1.5.2.1.2.x INTEGER RO
shows the status of the built-in Overvoltage Protection
epc1202SensorIndex .43.1.6.1.1.1.x Integer32 RO
None
epc1202TempSensor .43.1.6.1.1.2.x Integer32 RO
actual temperature
epc1202HygroSensor .43.1.6.1.1.3.x Integer32 RO
actual humidity
epc1202InputSensor .43.1.6.1.1.4.x INTEGER RO
logical state of input sensor
epc1202AirPressure .43.1.6.1.1.5.x Integer32 RO
actual air pressure
epc1202DewPoint .43.1.6.1.1.6.x Integer32 RO
dew point for actual temperature and humidity
epc1202DewPointDiff .43.1.6.1.1.7.x Integer32 RO
difference between dew point and actual temperature (Temp -
DewPoint)
4.5.2
Device MIB 1292
Below is a table of all device-specific OID 's which can be accessed via SNMP. In the
numerical representation of the OID the prefix " 1.3.6.1.4.1.28507 " (Gude Enterprise
OID) was omitted at each entry in the table to preserve space. The example for a com-
plete OID would be "1.3.6.1.4.1.28507.50.1.1.1.1". A distinction is made in SNMP OID
's in between tables and scalars. OID scalar have the extension ".0" and only specify a
value. In SNMP tables the "x" is replaced by an index (1 or greater) to address a value
from the table.
Name OID Type Acc.
Description
epc1292TrapCtrl .50.1.1.1.1.0 Integer32 RW
0 = off 1 = Ver. 1 2 = Ver. 2c 3 = Ver. 3
epc1292TrapIPIndex .50.1.1.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each receiver slot.
epc1292TrapAddr .50.1.1.1.2.1.2.x OCTETS RW
DNS name or IP address specifying one Trap receiver slot. A port can
optionally be specified: 'name:port' An empty string disables this slot.
epc1292portNumber .50.1.3.1.1.0 Integer32 RO
The number of Relay Ports
epc1292PortIndex .50.1.3.1.2.1.1.x Integer32 RO
A unique value, greater than zero, for each Relay Port.
epc1292PortName .50.1.3.1.2.1.2.x OCTETS RW
A textual string containing name of a Relay Port.
epc1292PortState .50.1.3.1.2.1.3.x INTEGER RW
current state of a Relay Port
epc1292PortSwitchCount .50.1.3.1.2.1.4.x Integer32 RO
The total number of switch actions ocurred on a Relay Port. Does not
count switch commands which will not switch the ralay state, so just real
relay switches are displayed here.
epc1292PortStartupMode .50.1.3.1.2.1.5.x INTEGER RW
set Mode of startup sequence (off, on , remember last state)
epc1292PortStartupDelay .50.1.3.1.2.1.6.x Integer32 RW
Delay in sec for startup action
epc1292PortRepowerTime .50.1.3.1.2.1.7.x Integer32 RW
Delay in sec for repower port after switching off
epc1292ActivePowerChan .50.1.5.1.1.0 Unsigned32 RO
Number of suppported Power Channels.
epc1292PowerIndex .50.1.5.1.2.1.1.x Integer32 RO
Index of Power Channel entries
epc1292ChanStatus .50.1.5.1.2.1.2.x Integer32 RO
0 = data not active, 1 = data valid
epc1292AbsEnergyActive .50.1.5.1.2.1.3.x Gauge32 RO
Absolute Active Energy counter.
epc1292PowerActive .50.1.5.1.2.1.4.x Integer32 RO
Active Power
epc1292Current .50.1.5.1.2.1.5.x Gauge32 RO
Actual Curent on Power Channel.