Gude Expert Power Control 1100, Руководство пользователя

Страница: 6 / 23

6
Expert Power Control 1100/1101 Hardware
3.2
Connections
1) mini DIN socket for Sensor
2) Ethernet (RJ45)
3) Button
4) Power Port (EPC 1100 CEE 7/4, max 16A/ EPC 1101 IEC C19 max.10A)
5) Power Supply (EPC 1100 CEE 7/4, 230 VAC, max.16A/ EPC 1101 IEC C20 max.10A)
6) Power Port LED
7) Status LED
3.3
Installation
1.) Connect the AC power connector on the back of the Expert Power Control 1100/1101 with a power outlet, or plug the
device into an outlet. The machine starts and is ready for operation after a short moment. The LEDs should be lit.
2) Plug the network cable into the Ethernet port on the front of the unit and connect it to your network.
3) Connect the load to the Power Port.
3.4
Status LED
The Status LED shows different states of the device:
Status LED red: Device is not connected to the Ethernet
Status LED orange: Device is connected to the Ethernet, TCP/IP settings are not allocated
Status LED green: Device is connected to the Ethernet, TCP/IP settings allocated, device is ready to use
Status LED blinks alternately red and green: Device is in Bootloader mode.