Gude Expert Power Control 1100, Руководство пользователя

Страница: 19 / 23

19
Expert Power Control 1100/1101 Operation
5.4
Energy Measurement
Electrical Measurement Specification
Category Range Unit Resolution Inaccuracy
(typical)
Voltage 110-265 V 0.01 < 1%
Current 0,1 - 16 A 0.001 < 1.5%
Frequency 45-65 Hz 0.01 < 0.03%
Phase -180 - +180 ° 0.1 < 1%
Active power 1 - 4000 W 1 < 1.5%
Reactive power 1 - 4000 Var 1 < 1.5%
Apparent power 1 - 4000 VA 1 < 1.5%
Powerfactor 0 - 1 - 0.01 < 3%
Energy Counter
Active Energy
(total) 9.999.999,999 kWh 0.001 < 3%
Active Energy
(temporary) 9.999.999,999 kWh 0.001 < 3%
6 Features
6.1
Bootloader mode
To activate the bootloader mode of Expert Power Control 1100/1101 the button must be pushed while restarting the
device. In bootloader mode it is possible to disable the password protection, to update the firmware and to restore the default
settings by running the program GBL_Conf.exe.
If the device runs already, press the buttons "select" and "ok" for three seconds. The bootloader mode of Expert Power
Control 1100/1101 is indicated by “BOOT-LDR” appended to the device name in the program window of GBL_Conf.exe.
During bootloader mode an alteration of the relais is not possible.
To restart the firmware, without toggle the Power Ports, press the buttons select and ok for three seconds again.
6.2
Firmware update
In order to update the firmware the program GBL_Conf.exe and the latest firmware are needed.
Start the device in bootloader mode and run the program GBL_Conf.exe. On the left side of the program window all Gude
devices that are in the network are listed. Select the device, that should be updated, click on Program DeviceFirmware
Update and determine the location of the new firmware.
Please note: The up-to-date firmware and GBL_Conf.exe can be found at www.gude.info, free to download.